| Previous | Next | Contents | Search | UA |
Professor Stephen Kavanaugh, Interim Head
Office: 290 Hardaway Hall
The department offers programs leading to the master of science in mechanical engineering degree and the doctor of philosophy degree in the area of mechanical engineering.
Two basic plans are available for earning an M.S. degree, one requiring a thesis (Plan I) and one not requiring a thesis (Plan II). During the first semester in residence, a student enrolled in any graduate program should form a supervisory committee and, in counsel with an adviser, submit a program of courses for the degree. Forms and information for this purpose can be obtained in the departmental office.
Research. The department brings together a broad spectrum of research skills in the general areas of acoustics, vibrations, dynamics, controls, automation, machine design, manufacturing, thermodynamics, heat transfer, and fluid mechanics. To support research, the department maintains well-equipped laboratories for engines; computer-aided automation; heating, ventilation, and air-conditioning (HVAC); numerical modeling; vibro-acoustics and sound quality; metrology and precision engineering; and robotics. The department also maintains a modularized area capable of supporting many separate projects, as well as a student machine shop. Students have easy access to modern computer facilities, including a departmental student computer room.
An applicant for a mechanical engineering graduate program should normally have a baccalaureate degree in mechanical engineering from an ABET-accredited curriculum. Other applicants will generally be required to remove deficiencies in certain areas by taking appropriate courses for which no graduate credit will be awarded. Additional information regarding admission is in the "Academic Policies" section of this catalog.
Plan I departmental degree requirements. The following are the department's requirements for the Plan I master's degree:
Plan II departmental degree requirements. The following are the department's requirements for the Plan II master's degree:
Doctor of philosophy departmental degree requirements. The following are the department's requirements for the Ph.D. degree:
ME 500 Intermediate Fluid Mechanics. (3-0) Three hours. Same as AEM 500.
Prerequisites: MATH 253, ME 215, and AEM 311.
For description, see AEM 500.
ME 501 Mechanical Engineering Analysis I. (3-0) Three hours.
Prerequisites: ME 309, ME 349, and ME 372.
Analysis of mechanical engineering systems; presentations and application of advanced analysis techniques for continuous and discrete dynamic systems.
ME 502 Transport Phenomena. (3-0) Three hours.
Prerequisites: ME 215 and AEM 311.
Steady and transient mass; energy and momentum transport in ideal and real substances.
ME 503 Intermediate Gas Dynamics. (3-0) Three hours. Same as AEM 503.
Prerequisites: ME 215 and AEM 311.
Basic equations and concepts of compressible flow; shock and expansion waves; and development of the generalized one-dimensional equations and solution of these equations for various types of flow, using computer software.
ME 506 Foundations of Thermal Power Generation. (3-0) Three hours.
Prerequisite: Graduate standing. Not open to students who have taken ME 406.
Thermal power systems; components, process analysis and modeling, fuels, combustion, environmental aspects, and availability analysis in steam and gas turbine plants. Examination of recent trends such as cogeneration and combined cycles.
ME 509 Intermediate Heat Transfer. (3-0) Three hours.
Prerequisites: ME 309 and AEM 311.
Intermediate treatment of conduction, convection, and radiation heat transfer.
ME 516 Foundations of Energy Conservation and Management. (3-0) Three hours.
Prerequisite: Graduate standing. Not open to students who have taken ME 416.
Analysis and management of energy use in residential, commercial, and industrial applications, including lighting, heating and cooling, controls, and energy management systems. Topics include economics, auditing, energy management, and alternative energy sources.
ME 517 Controlled Environment System Design. (3-0) Three hours.
Prerequisites: Graduate standing and ME 407. Not open to students who have earned credit for ME 417.
Design and simulation of conventional and unconventional environment control systems. Heating, ventilation, and air conditioning (HVAC), thermal storage, solar, geothermal, demand reduction, measurement, and control.
ME 518 Principles of Combustion I. (3-0) Three hours.
Combustion thermodynamics, flame temperature and equilibrium compositions, ignition processes, detonation and deflagration, diffusion flames, and similitude; assigned papers.
ME 541 Introduction to Biomedical Engineering. (3-0) Three hours.
Prerequisites: MATH 253, PH 106, and either AEM 201 or AEM 361.
Introduction to the relationship between engineering and medicine. Modeling musculoskeletal and cardiovascular systems. Review of medical devices such as non-invasive imaging devices, biopotential electrodes and amplifiers, and assistive technology.
ME 550 Advanced Mechanical Design. (3-0) Three hours.
Constitutive relationships, Castigliano's method, fatigue, stochastic relationships, time-dependent properties, and other advanced topics.
ME 553 Mechanical Reliability. (3-0) Three hours.
Prerequisites: ME 363 and ME 358.
Probabilistic methodology for assessing the reliability of a mechanical system at the design stage.
ME 561 Techniques in Experimental Research. (2-3) Three hours.
Prerequisite: ME 360.
Design of experimental research systems; study of instrumentation, transducers, and related electronic components; data acquisition, error analysis, experiment planning, and proposal writing.
ME 562 Intermediate Dynamics. (3-9) Three hours. Same as AEM 562.
Prerequisites: MATH 238 and AEM 265, or permission of the instructor.
Dynamics of systems in moving coordinate frames; Lagrangian formulation and Hamilton's principle; stability and perturbation concepts for rigid body motion; motion of systems of rigid bodies in three dimensions.
ME 567 Robotics and Control Hardware. (3-0) Three hours.
Prerequisites: Graduate standing and ME 360.
Corequisite: ME 475. Not open to students who have earned credit for ME 467.
Familiarizes graduate students with the design of robots and control systems, with an emphasis on hardware used in real-world implementations. Extra outside reading assignments and projects distinguish ME 567 from its undergraduate counterpart, ME 467.
ME 570 Mechanical Vibrations. (3-0) Three hours. Same as AEM 570.
Prerequisites: ME 372 and AEM 250.
Formulation and solution of free and forced vibration problems with single and multiple DOFs. Both modal and frequency response techniques are discussed.
ME 571 Fundamentals of Acoustics. (3-0) Three hours. Same as AEM 571.
Prerequisites: MATH 253, PH 106, and either ECE 320 or ECE 225.
Fundamental physical principles underlying wave propagation and resonance in mechanical systems. Introduces applications and provides experience in acoustic and audio measurements and the associated instrumentation. (ES2, ED1)
ME 577 Advanced Linear Control. (3-0) Three hours. Same as AEM/ECE 577.
Prerequisite: ME 475.
For description, see ECE 577.
ME 578 Nonlinear Control Systems. (3-0) Three hours. Same as ECE 674/AEM 578.
Prerequisite: ME 475.
For description, see ECE 674.
ME 591 Special Problems (Area). Variable credit.
Credit awarded is based on the amount of work undertaken.
ME 594 Special Project. Two to six hours.
Planning, executing, and presenting results of an individual project involving a research design, analysis, or similar undertaking.
ME 598 Research Not Related to Thesis. Variable credit.
ME 599 Master's Thesis Research. One to six hours.
ME 605 Classical Thermodynamics. (3-0) Three hours.
Prerequisite: ME 215.
Classical macroscopic thermodynamic analysis of systems, pure substances, mixtures, and reacting systems.
ME 607 Conduction Heat Transfer. (3-0) Three hours.
Prerequisite: AEM 309 or equivalent.
Transient, multidimensional heat conduction in various geometries, and the mathematical and numerical means to analyze them.
ME 609 Convection Heat Transfer. (3-0) Three hours.
Prerequisite: ME 309 or equivalent.
Laminar and turbulent internal and external flow, natural convection, and the mathematical and numerical means to analyze them.
ME 611 Finite-Element Analysis of Convective Heat Transfer. (3-0) Three hours.
Prerequisites: ME 309, AEM 311, and ME 349; or permission of the instructor.
Introduction to finite-element theory; Galerkin method of weighted residuals; shape functions; isoparametric elements; finite-element convective-diffusion equation; upwind methods; turbulence modeling; and utilization of commercial finite-element codes for analysis of convective heat transfer.
ME 615 Statistical Thermodynamics. (3-0) Three hours.
Prerequisite: Permission of the instructor.
Statistical ensembles: Maxwell-Boltzmann, Bose-Einstein, and Fermi-Dirac statistics. Application of statistical mechanics to thermodynamic processes.
ME 618 Principles of Combustion II. (3-0) Three hours.
Prerequisite: ME 518.
Parameters of confined combustion; evaporation of fuel, velocity of flames, detonation, and chamber design; dynamic effects; and measuring techniques. Assigned papers.
ME 620 Finite Difference Methods in Fluid Dynamics. (3-0) Three hours. Same as AEM 620.
Prerequisites: GES 126, MATH 253, and AEM 311.
For description, see AEM 620.
ME 621 Boundary Layer Theory I. (3-0) Three hours. Same as AEM 621.
For description, see AEM 621.
ME 629 Radiation Heat Transfer. (3-0) Three hours.
Prerequisite: ME 309.
Physical laws of thermal radiation; implications of entropy and probability; view factors; geometrical and spectral characteristics; and absorbing-scattering media.
ME 662 Advanced Dynamics. (3-0) Three hours.
Prerequisite: ME 562.
Stability of autonomous and non-autonomous dynamical systems; Hamilton mechanics and canonical systems; analytical solution applying perturbation techniques; and analysis of dynamic behavior using geometric theory.
ME 665 Advanced Design of Automated Manufacturing Systems. (3-0) Three hours.
Prerequisite: ME 465.
Advanced studies in the design of industrial robotic systems using analytical and interactive computer-graphics techniques. Topics include robot kinematics and dynamics, the reverse kinematics problem, numerical techniques, adaptive control theory, robot motion planning, and trajectory specifications.
ME 677 Optimal Control. (3-0) Three hours. Same as ECE 677.
Prerequisite: ME 577.
For description, see ECE 677.
ME 678 Advanced Topics in Control. (3-0) Three hours. Same as ECE 678.
For description, see ECE 678.
ME 693 Selected Topics (Area). One to three hours.
Topics of current research in dynamics and controls, solid mechanics and structures, or thermal/fluid sciences; applications to mechanical engineering.
ME 694 Special Project. Two to six hours.
Planning, executing, and presenting results of an individual project involving a research design, analysis, or similar undertaking.
ME 698 Research Not Related to Dissertation. One to six hours.
ME 699 Doctoral Dissertation Research. Three to twelve hours.
| Top | Previous | Next | Contents | Search | UA |